S13 blacktop into s14 wiring problems want to come help me?

I just swapped a 98 black top sr20 into my 95 s14 and I have a few problems. I'm not getting fuel or spark. All the write ups I have read have different pictures of the harness. If anyone can come over to help me figure it out I'll buy you lunch or something

Where are you located?

Carol stream

what ecu are you running?

I'm not so sure which one it is. It came with the motor. I'll get all the numbers off of it when I get home

ok ive sorced the part numbers back and it looks like i have a S14 harness and ECU. the number on the ecu is 23710 69f00 and a18-000 g70 WC which i have traced to a S14 sr20det 5 speed. is there any way i can get my motor to run with this ecu and harness??

Well we got it running. Sort of haha it's rigged up but it runs. We need to find a way to ground out the injectors. We can manually ground them to get them to fire but that's about it right now any ideas?

Well the ground pulse is linked to the igniter chip, if their is a fault there, then the injectors wont fire, mine didnt start cause of faulty igniter wiring.

i got it all sorted out. shes running like a champ now, it only took an all nighter and lots of forums to figure out the harness. thanks bud

hmmmm since your swap you dont happen to have a 5 speed trans laying around do you? lets talk if you do!!