BEASTMODE PARTOUT

ill sell the whole thing for 10k or $8500 on stock se wheels.this is a rust free car.car runs awesome on a safe basemap a good dynotune would open up even more power.the car has no bodykit as of right now.



















Head

-MBV Solid Lash Adjusters and Cam-cap Stud Kit
-Peak RAS
-Brian Crower 264 cams (oem gears)
-Brian Crower spring/ retainer kit
-JWT bronze valve guides both sides
-OEM valve stem seals both sides
-3 angle valve job
-apex-i head gasket
-arp head studs


Block

-Knife edged crank
-cp 8.5cr .020 over pistons
-eagle rods
-arp main studs
-all new oem Nissan bearings
-new oil pump
-new water pump


Engine externals

-2871r .64 turbo
-custom turbo lines
-megan turbo manifold (mls nissan gasket and new oem gasket on turbo)
-megan turbo elbow (new oem gaskets used)
-3 inch greddy downpipe
-3 inch mandrel bent exhaust i also have aspec blastpipes i could include
-Tomei 740cc injectors
-z32 maf
-sard fpr
-freddy intake
-greddy intercooler
-touge factory hotpipe
-greddy intake coldpipe
-hks ssqv bov new style
-new nismo motor and trans mounts
-walbro 255lph
-Greddy pullys
-ATI damper
-GReddy oil pan
-koyo radiator
-samco hoses
-j30 diff
-b&m shifter (the good one)
-A-pex’i Power FC with commander



interior

-working hud
-nardi steering wheel
-greddy boost gauge
-greddy oil pressure gauge
-greddy temp gauge
-greddy a/f gauge
-greddy egt gauge
-greddy boost controller
-s14 seats
-autopower bolt in cage


exterior

-pearl white paint still looks good
-origin trunk spoiler
-custom vented oem hood
-oem silvia fenders
-s13 silvia brick headlights
-oem corner lights
-origin crystal taillights




rollers

-5 lug oem s14 rear
-5 lug oem front with s14 lca
-front Enkei rpf1 sbc 18x9.5 +15 falken 235/40/18
-rear Enkei rpf1 sbc 18x10.5 +15 falken 245/40/18


a lot of these parts are new and the motor barely has any miles on it.make offers on what you want.id like to keep the head and block together since it has arp headstuds and apexi headgasket. and i would like to keep the front on the car since it still has good paint.

If your gonna part out the coils or the front ill take both

Coils are gone and I'm not parting the front

How much for the s14 seats and short throw?

im goin to play the lottery now.

$100 for the seats.240slider is selling the same shifter for $135 i dont want to take the shifter off the trans yet

please sell the front to meeeee

buy ka24orce front its prolly just as clean.i cant part the front from the chassis they are like peanut butter and jelly

How much for 5 lug oem front with s14 lca only?

yea, you're right.. they're just meant to be together

How much for the turbo, outlet and injectors?

how much for the full swap? willing to trade for anything?

swap with be around 5k depending on what all parts you want.no trades

basically all i would need is the wiring harness, ecu, trans, bottom end how it is, top end without the cams or valvetrain. i wouldnt need the pulleys, motor mounts, manifolds, exhausts, trans mount, diff, driveshaft. just need the motor and trans.

Partout the front = ) i want your hood

If you partout the front ill take your fenders, headlights, corner lights

flaco, i have a full set of lights if you're interested

check the market i posted them up

how much for the power fc

^^^^?

im bout to just keep it nobody is interested in the motor setup and if they are they wanna give me 2k for a 400hp setup lol + i just bought some pbm coilovers