Fusion's Build/Mods/pics!

go w/ this
Stop Tech Stage 2 Upgrade Kit 240sx 89-96 4-Lug Non-ABS
Our Price: $569.99



And i may be able to get them cheaper if u want

Atown 240 wrote:

go w/ this
Stop Tech Stage 2 Upgrade Kit 240sx 89-96 4-Lug Non-ABS
Our Price: $569.99



And i may be able to get them cheaper if u want

ummm yea... do they have stage I's? loll

cheaper is always better. thats a lil much more then i wanted to spend. also i don't think u can run stock wheels with those? i don't wana be buying brake kits that wont let me drive cuz i'm not gettin wheels anytime soon i don't think.

dude it's OEM replacements but better lol

i like mine


10 times better than stock no regrets

which are those?

z32

calipers and rotors?

probably, they have to go togethr i think.

energy suspension master kit, z32 brakes (might take em off my sisters car), and tokico blue shocks with eiback springs coming soon... prolly pick em upp next week... then i'm done with modding til spring time...

gotta save up fer X-mas ... g/f's cost a lot... loll

lol, save for coils! They will only be like 3-400 more then the suspension set up ur getting.



I was wondering why u were asking me about the bushing set i just bought lol

FusionR300zx:
[quote]energy suspension master kit, z32 brakes (might take em off my sisters car), and tokico blue shocks with eiback springs coming soon... prolly pick em upp next week... then i'm done with modding til spring time.

I have the ES master kit, and it's pretty good, stiffens everything a lot, defiently need some struts/ shocks to really get the better handling feel. I run Eibach's w/ sportlines and KYB AGX's.
I love my Z32 brakes, especially if you have a lead foot like myself..lol I'm awaiting on backing plates for my rear Z32 set-up....backing plates are a pain in the ass to find by themselve inless you go to the dealer, they want $67 a piece was what I was quoted...fuck that.

ummmm, come help me install my bushings

I could, it's just a matter of if you have access to a hydro press. Or some Mapp gas(oxyacetlyene perfered), big hammer, chisels, air cutter tool, air hammer, C-clamps will do the trick. The hardest part is getting the old ones out, the new ones are a lot more flexiable. Depending on when your looking to do it, I may be able to assist you.

Oh and some heat too....lol I'm a smoker, bad blood circulation..lol

yes i got heat, + air tools, everything but a press lol.

This weekend?

SAFCII installed... have no clue how to use itt... hahh..

stop thread jackin mofo's... but i need those bushings installed too...

after i buy them.

luckily ur car isnt low fusion... cuz unless u get some sort of lip, a little bump or hole, or even a slight hill will crack ur intercooler.... and im pretty sure u dont want that.....

^^i need a new bumper^^


NOWW

hahahh.. anny reccomendations? i was thinking to just buy a lip.... but the whole look of the lip would be ruined because the part of my bumper now is cut and the peice that goes down the middle is cut too...

so i'm thinking JDM OEM front... but that will look wierd cuz of my baby intercooler...

almost got my first ticket todayy...

with the SR... hahahh

~90in a 45...

he was goin the opposite way and there was medium traffic behind me so i went down a couple side streets then took side streets to my house... then he pops outta nowhere and gets behind me and follows mee and then about 5 min later when were in a neighborhood where no1 is outside he pulls me over and starts questioning mee and i just said i didn't come from that street. let me go and his words are "i'll get you next time"

hahahh... it was funn... my does of adrenaline for the day

oo... and when i come back from vacation i saw that my dad was driving my car while i was gone.. he got a squeeling tires ticket and said he raced a GTO and took it from 1st thru 2nd and then he said the race was over loll.

just picked upp some Tein S. Techs 2day fer $170.

any recommendations on shocks? that match up good with these?

i was thinking of.... http://www.stillen.com/product_detail.aspx?sku=TOKHB3153

i've heard that KYB's are not bad.

u kno a average price on those?

where did u get the clip????????

s14rob wrote:

where did u get the clip????????

like raceup or something... he has a ebay account... u can also get them from SOKO which is in northbrook i belive?


jsut picked up a Megan Racing black seat woot woot... charcoal FTL and black interior FTW