Fusion's Build/Mods/pics!

check it out...

took out the KA yesterday... 10/09

post pics up 2morrow at g/f's house and don't have pics saved here...


Recieved front clip today 10/10
took it out of clip...









^^cheap ass BOV it came with^^





^^heap of junk^^



SRand tranny hangin... do yo chaing hang low do it wobble to the flo? hahahh





SR in car... 10/11
now the wiring issue... will be doing that all day 2morrow...
as well as putting the radiator and fan ...





10/15
havn't worked ont he car in a bit... but here's the new update...



auto to manual swap is done and clutch and tranny are mounted... haven't started the wiring yet. anyone got any "manuals" for the wiring? i need all the help i can get! thanks. oo... and sorry for the blurry pic... i took it fast and just put my fone away.

intercooler is mounted and piping chillin on the floo 10/19





turbo timer, boost, oil, water gauges... 10/25
slowly progressingg... hopefully done soon.





havn't gone to the shop in a while... tryin to pick up a really nice "beater" loll

and i was thinking of getting a SSautochrome full engine back exhaust on ebay... idk though but it does have a lifetime warranty it says... but it's 3"catback, downpipe, cat replacment pipe, turbo dump tube + turbo manifold for $455 including shipping... worth it? any opinions on ssautochrome?


and is anyone here selling a big FMIC? i don't need piping but it's always a +!

i will also have a list of parts for sale from the heap o junk under the clips hood... it's all in REALLY good condition actually.

any font body parts???

like headlights and bumper or hood fenders and whatnot?

lemme know

but DAMN that is one shinny ass SR20

hahahah
TRUE THAT. ..
like you dipped it in oil and covered it in sexy. .

nice work; betcha wont sell it now

loll... wont sell it at all... well... MAYBE... but i don't think i will be anytime soon... but emm.. the clip actually didn't come with front fenders or anything... those clips go for about like.. $3500+ with working or "fixable" body parts... i saw a clip with a full front end conversion for $3800 but i didn't need it cuz my car isn't a s13... dont need s13 headlights. dont' kno what exactly i got for sale yet... besides the gauge cluster in KM/h... loll... 97,xxxkm on the motor...

and yea.. the guy said he had a SUPER clean one... and it came with some funky BOV.. but w/e... it was $200 more then the other clips.

anyone no wher ei can get a local Intercooler kit for cheap? piping i'm not really worried about... but it would be a bonus if it came with. don't really wana spend more then $400...

i gota get a 1pc drive shaft from TF as well...

and exhaust...

and some electronics..

anyone wana help me out?

PeakBoost(Garrett core)24x6x3.5 Intercooler 2.5" inlet and outlet


from my old turboed si, filled the front bumper perfectly. if intrested shoot me an offer.

hmm... post me a pic... and i'm looking to spend $300 on a intercooler and about $100 on piping... so i don't wna spend more then $400 as i sitll have to get a clutch and driveshaft. and possibly lowering spring... but the cluthc drive shaft itnercooler and exhaust are a necessity right now.

i only have a huge pic so if you wanna pm me your email addy ill send it your way. intercooler has 700 miles on it so its in like new shape.

Wow pretty sure I told you not to sell it and do a sr and 5 speed swap about a month a go glad you got your shit together very nice kouki

Very very nice. I love how quickly you got everything together....and one thing thats apparent is everyone is wearing jackets...the one thing I dont miss about Illinois weather. Haha

slidewayz240sx wrote:

Very very nice. I love how quickly you got everything together....and one thing thats apparent is everyone is wearing jackets...the one thing I dont miss about Illinois weather. Haha

LOLL gerrr... the guy that is doing the swap right now used to work at some place in florida where they first started doing RB swaps... this is his first SR... eekk... so idk how long the wiring is gona take... but... i jsut got some shit that i printed outt... should be done saterday night if i can get a intercooler,driveshaft, and a clutch... then i'm ready to roll. woot woot

Haha I was gonna say, from the looks on everyones faces in the pictures...they look like they have never seen an SR before.lol

jsut picked up a stage one exedy clutch and a precision garret core intercooler from one6 today...

hopefully will be done and ready to drive 2morrow if i can get a driveshaft... i can't wait...


ps... i've never owned a stick car/turbo car before...

and i already have 11 tickets.... guhhh... can't wait!! loll

yea but if you got 11 tickets in a stock auto 240 imagine how many you can rack up w/twice the horsepower

i got 2 in my stock auto 240... the rest were in my SLOW HOE 3HUNDO!! hahahh... it's a 4300lb automatic beast with only 230rwhp (headers, exhaust, intake, chip) but it's have and gayy... just looks real nice.

i can't wait... i'm off to the shop... i'll get more pics for you guy's later onn!!

youll be ready by the meet wont u

yea i will... i think... it's the 21st right? i should be ready with a couple tickets in hand by then. loll

but yea... we havn't even started the wiring yet... were just drillin holes for the clutch master cylinder 2day and put in the clutch pedal and the clutch/tranny. next thing is the driveshaft... i just don't really wana spend $430 on a 1 pc driveshaft from tougefactory... but that's the best i can get so far that's in town... i don't want to wait for shipping, anyone know of any where to get a driveshaft made?

haven't started the wiring yet. anyone got any "manuals for the wiring? i need all the help i can get! ...thanks.

http://carfiche.com/manuals020/cars/

Has wiring diagrams and everything.

You have to wait for your year car to color since this site is huge. It has wiring diagrams and everything. You can use this site to break your car down bolt by bolt. Its well worth the wait. The list refreshes I believe every hour, allowing you to download the manuals for your year car.

alright,

first off, u TRADER!! lol

Go w/ the SSAC exahust, I've never heard anything but good things about their exhaust.

U dont need a 1 piece driveshaft, there is no neeed for it. Ask the SR guys where they got theirs.

I wouldn't trust a guy who's new to SR's to wire my motor lol. I would take it to TF to get the wiring done. I konw they dont charge that much.

It's lookin clean though. Glad u decided to keep it.

he's done other swaps before... he's done like... 4 rb25 swaps and 1 rb26 swap and one SR in his sentra but the wiring for a sentra and 240 are different. i need a new driveshaft... thats all i kno... so i may aswell buy a 1 pc instead right?

Atown 240 wrote:

alright,

first off, u TRADER!! lol

Go w/ the SSAC exahust, I've never heard anything but good things about their exhaust.

U dont need a 1 piece driveshaft, there is no neeed for it. Ask the SR guys where they got theirs.

I wouldn't trust a guy who's new to SR's to wire my motor lol. I would take it to TF to get the wiring done. I konw they dont charge that much.

It's lookin clean though. Glad u decided to keep it.

$450 shipped good deal?

so SSAC is a pretty good/cheap company?

KA24DE for sale!!

$250 it's in evanston right now... but i could bring it to my house in Des Plaines 60018 if you'd like to pick it up. asking $275. nothing is wrong with it just has 188k miles. PM or AIM mee... FusionR300zx