WTB: s13 manual conversion parts

i need all parts except for the tranny

Heavythrottle sells a kit for about 500 bucks I think.

www.heavythrottle.com

I have only the best to say about them.

I spent 150.00 on my conversion.

Buy slave cylinder, Master cylinder and two 3/16 hydraulic lines from Murrays. One 12" Long The other 51" Long. Two adapters (to connect these.

Go on Ebay get yourself your clutch pedal and a steel braided clutch hose to bypass bleeder block and go from hydraulic line directly to Slave cylinder on tranny. And rent a tool to bend your hydraulic lines.

Dont waste your money on the brake pedal just cut auto brake pedal to size. The whole job takes about 1 1/2 hours The longest part is installing the Master cylinder. Let me know if you have any questions.

You should be able to find a trans on this forum locally cheap. I
only spent 100 for it.

You will also need a different crossmember and drive shaft for the manual conversion. I would replace the shifter with a short shifter right of the bat. get the console for a manual as well as the rubber and leather boots that go on it. My reciept for all thses parts at a junkyard in Indiana was for. $39.82 Alot of junkyards in the area have 50% off regular prices on Holidays.