TW: 91 hatchback Parts...AMS, Work, Tein, Koyo

NAME: Kyle Close
PHONE NUMBER: 815-997-2265
EMAIL: kpc_0721@yahoo
LOCATION: Rockford
PAYMENT PREFERENCE: CASH CASH CASH. Paypal +3%
------------------------------------------------------------------
ITEM:
PRICE: FIRM
SHIPPING:
DESCRIPTION:

Any questions feel free to pm, call/text or email me.

I will have pics up tomorrow of some of the bigger things, could take pics of smaller stuff on request(as long as my sis is around to use her camera)

Right now all the parts are on the car unless except for a couple suspension peices that are stated BNIB. I am trying to see what interest I can get and if it is worth parting it out.

It may be a little bit before I can actually start pulling parts off the car because all of my tools are still in my old house and I would need to find some stock parts to replace some of the parts being sold.

If anyone was interested in buying the car with all of the parts included that would save me the hassle and could work out a better deal...



91 hatchback 168,xxx - Make Offer?
Black
Manual windows
sunroof(needs to be wired back up)
manual locks
Driver side fender is cracked and paint is starting to chip.
frame rails are not the greatest from previous owner jacking the car up from them.
some rust on the body and underneath the car.

Comes with-

Beat up knockoff origin stylish kit.
5 lug-New Ichicba fronts, OEM s14 rears
OEM s14 SE rotors 5 Miles on them. Some surface rust from sitting but
should go away after driving on them.
Gay knockoff nismo steering wheel, tiny like 320mm.
Knockoff rear strut bar

I would need to find stock supsension for the car because am selling all the supsension off the car and would need to bring your own wheels


Parts For Sale!

-Kouki Tail lights, no lower metal panel or key and locks. $340

-Koyo Radiator & AMS Slim fans $350

-AMS Small battery, need to make or buy your own tie down plate $100

-GP Sports 3in Exhaust & newishvibrant gaskets & rubber hangers. Comes with 3in test pipe as well. $225

-AMS Small battery, need to make or buy your own tie down plate $100

-DC header with newish mr copper gasket $85

-Solid motor/trans mount. $130

-Work Miester S2R 18x9 +18 Powder coated black by CMWERKS(2 are
starting to chip). Come with Falken azenis st115 225/40/18 90% 2
unmounted though.$1000

-Konig Monsoons 17x7 with tires.
front falken ziex 512 205/40 85%
rear kumho ecsta ASX 215/45 65%
not sure of offset. Use ase spares or something. $180

-Tien HE coils 8k rear/6k front 3000 miles.$650 plus your stock suspension

-Ctune RUCA's $45 plus your stocks

-Ctune Traction arms $45 plus your stocks

-Ctune Toe Rods $45 plus your stocks

-Peak street inner tie rods/circut sports outers (BNIB) $105

-Tie rod dust boots (BNIB) $20

-Circut Sports Tension Rods (BNIB) $95

-3 Guage Vent pod $15

-Autometer cobalt mechanical water temp & oil pressure gauges. Practically new. $100

-Circut sports shift knob. $20

-Circut sports drift knob not installed. $10





-93 KA24DE 95,xxx longblock+tranny $450(read description below)
91 exhaust cams( suppossedly)
ARP Headstuds 10 Miles
Felpro Headgasket 10 miles
rebuilt 95 head that was recently milled for new headgasket. 5000 miles
Emissions removed
trans with 165,xxx grinds 3rd when shifting fast. Just put mt-90 gear oil in.
New intake manifold gasket.
ACT street clutch & pressure plate 6000 miles.New cap & rotor
NGK Wires
New NGK bkr5-11 plugs or something like that.
New PCV Hose.
Rear main seal replaced not to long ago from previous owner.
Comes with new oil pan gasket that needs to be installed.

Motor ran perfect after the new headgasket and held idle at 1000 but then starting having a high idle problem due to a vacuum leak somewhere. When I removed the emissions I jb welded where the butterfly valve rod went through the intake manifold, It could be that the jb weld didn't seal right and one of the holes is exposed causing the funky idle. I'm not trying to screw anyone so I'm being as honest as I can about it. I don't have the time or patiance to try and fix it. I think if you swapped a different intake manifold on it the motor would be ready to go.

Post some pics...

u better give me a better deal than that on those tail lights. and i want that center vent gauge piece, and maybe those gauges too... call me up

Master Trucky wrote:

Post some pics...

Will do, just been trying to catch my sister before she leaves in the morning to give me her camera.

Pics will be coming in the morning.

Sorry for the crappy pics but thats the best I can do without having my tools or jack here.

Also added that the gp sports exhaust comes with a 3in test pipe as well.

ill take the vent gauge pod if u still got it.

i'll take the whole car with all the parts on it.