IL/FS: Work S1-2P's Gold 18x8 and 18x9.5 MINT!!!

These are setup for fitting/tucking aggressive rubber on a stock bodied S13 or an S14, but you may want to add a spacer on an S14. These are not for stretching tires, but you can do what you want with them. These would also be a decent setup on an RX-7 or S2000. I imagine the S2000 would need a stretched tire and some minor camber on a stock body. The wheel size is as follows: 5 x 114.3

Front: 18x8 +32 A-disc for big calipers. I run a 235/40

Rear: 18x9.5 +44 O-disc. I run a 265/35

Fronts have a 2.5" lip and the rears have a 3.4" lip.

These are in mint condition! When they arrive at your doorstep they will look new. This sale is for the wheels only.

Please feel free to ask any questions!

"Asking" $1750 picked up or $1850 shipped and Paypal'd. I'd even throw in a free new Alpine CD player!!!







EDIT:

I'm adding in pics of each wheel with 5 different views each: front, back, front lip sticker, front spoke sticker and rear inside "wheel specs" sticker.

FRONT WHEEL







OTHER FRONT WHEEL







REAR WHEEL







OTHER REAR WHEEL

$1900 shipped, $1800 picked up?

Bump for the the cleanest 240 around,. Whats up broadfield sorry for talkin shit to u guys on x-box awile back didn't know it was you. Guys see the 5 star general and imediatley trash talk so im a pre-emptive shit talker now lol. What's the new wheels gonna be?

rc1honda wrote:

Bump for the the cleanest 240 around,. Whats up broadfield sorry for talkin shit to u guys on x-box awile back didn't know it was you. Guys see the 5 star general and imediatley trash talk so im a pre-emptive shit talker now lol. What's the new wheels gonna be?

What's up fool!?!

Yeah, I figured you were just messing with us when you were talking shit. Like you said, you go into defensive mode out of the gate assuming people are going to talk shit about your 5-Star.

Next wheels are going to be more aggressive. I am going to do a perfectly executed pull on the rear, whether I can pull it right off the bat, or have to do the body work and paint it...... it will be right. I am doing a set of Work VS-KF's in burning black: 18x8 + 20 in the front and 18x10+22 out back. I will still run a 265 tire out back and a 225 up front.... I need traction. I have a sponsorship from Mackin, but they don't have anything in stock that I want with the right sizes. My buddy just happens to be selling these KF's that only have 200 miles on them... so why not!

your roll/pull should be easy with no bodywork.ill do it if you want to drive all the way out here lol

heres mine i have 18x10 +18 with 235/45

Hey, what's up Dabs. Yeah, I have the same roller as you have. We just pulled my friends S14 and it turned out great. Hopefully I have the same luck he did. My only fear is the quarter buckling. Have you ever had that happen on an S13?

not yet i rolled a few s13 fenders i did one massive roll and it didnt buckle so i think yours should be fine.i was pushing on the rear fender to see if it would buckle and it was still solid

the little dents on the car were there before the pull lol

Damn, that looks good man! I might need that much considering I'm going to be running a 265 out back.

your pull shouldn't need to be that extreme 265 is a lot of meat tho.how close was the tire to the fender with the +44

It's about 3-5mm with the tire slightly tucked and a roll. It's a little lower now than it is in the 1st pic.

my pull got me 15mm you will need about 20-25mm pull so it wont look much different than mine it will be a little more flared and your paint shouldnt really chip.in my pics i still have a ton more room in between my tire and fender i was thinking of running a bigger spacer

Yep, I had planned on pulling it an inch.... or even 30mm so I don't have to run much camber. I figured I would pull it a certain amount then test fit... then pull more if needed. Sounds like you have a good amount of experience with it. On my friends we kept the paint at about 120 - 130 degrees and had no issues with the paint.

I hope your shit comes out clean i love the oem look of your car and i still need an updated bay pic i heard you went twin scroll

Ask and you shall receive

I am also finishing up my interior..... AGAIN. I finally got a set of Bride Gias Mazoria limited editions. I just got done reupholstering the back seat in matching Bride material along with the door cards that I bought from you, glove box, arm rest, rear deck and I still have the headliner to do. I'll probably do a Bride shift boot since I have a lot scraps left over.

Added new pics to the original post and lowered the price!

damn shit is still crazy clean.make me a shift boot too with that extra material

holy hell. looks so nice.

Free bump, wheels look fantastic in person.
I would consider them brand new.

toby i tried to call you the other day.. i want to help me make this cluster!!

crazy nice wheels! even better in person!
btw are you buying those VSKFs from Zeller?

Theyre already on. They look -killer-

hs13kls wrote:

toby i tried to call you the other day.. i want to help me make this cluster!!

crazy nice wheels! even better in person!
btw are you buying those VSKFs from Zeller?

Yep, I bought them from Zeller. As Ryan said.... they look sick!

You should of left me a message fool! I didn't know it was you that had called. I just saw that I had a missed call!?!