SR and misc 240 parts..

Name: Ian
Location: Chicago
Shipping: At buyer's expense

Best way to reach me is by texting, 847 644 0469
-------------------------------------------------
All prices are O.B.O., so shoot me an offer!

Best way to reach me is by texting, 847 644 0469
-------------------------------------------------
All prices are O.B.O., so shoot me an offer!

-Leather Solstice Driver's seat ($110)
got it from a certain shop. seat is mint, new leather.. SUPER comfy.. has decepticon logo, if that's what you're into..

-Full SR20 wiring harness ($100)
-Pulled from a S13 front clip, has EVERYTHING.

-T3/T4 .57trim 60comp Garrett Turbo ($275)
Minimal shaft play, ran fine and pulled strong. For $35 more buy it with the oil feed line.

-Peakboost Top Mount Manifold w/ 38mm Tial External Wastegate for SR20 ($550)
This is a top mount manifold, with the Tial wastegate welded onto the manifold. Manifold goes for $800 new, wastegate is about $200 new.

-Peakboost 3" Stainless Downpipe ($200)
3" peakboost top mount downpipe for a top mount turbo (used in T3/T4 setup). Includes upper and lower downpipe.



-Greddy SR20DET Intake Manifold ($400)
-Great for high power applications, will include the cold pipe that fits.


-SR20 Mounting brackets ($40)
Connects the block to the motor mounts

-FULL VMount Intercooler setup ($400)
Comes with C&R import racing radiator w/ single electric fans, custom radiator hoses (includes extra lower hose), modified greddy coolant surge/fill tank painted sparkly black w/ new rad cap, modified Greddy M spec intercooler core (painted black), steel hot pipe w/ nipple for wastegate hose, aluminum greddy flanged cold pipe


-OEM SR Shortblock ($400)
PERFECT SR bottom end, disassembled, come by and see the internals for yourself. Great if you want to put together a cheap swap, or if youre looking to build the motor.


-OEM SR20 Flywheel ($50)
Needs a light resurfacing, comes with all flywheel bolts.


-OEM S13 Suspension($100)
OEM Springs/Struts, no issues, drove fine.

-OEM S13 RUCAs ($40)
No issues, selling b/c I have Peak performance arms
-OEM SR20 O2 Sensor($50)

-OEM SR20 Transmission Gasket ($25)

-OEM SR20 Pulleys ($75)
Will include pulley belts for $20 additional


-Greddy FMIC ($90)
No issues, perfect.

-Garmin Streetpilot c330 Touchscreen Navigator ($150)
Used for about three months, unit is in mint condition. Comes will car charger and mounting components.

-Aluminum racing radiator with 2inch core ($150)
No issues, fits S13 engine bay perfectly. Needs custom mounting brackets.

-OEM S13 Tie Rods($40)
Never had a problem, came on a steering rack that I swapped onto my car.

-OEM Spark Plug Cover ($30)
As it says, not much to it really.. No cracks, dents, etc etc.


-RTX 17x7 +40 wheels w/ tires, and two extra tires ($300)
Email me for pictures, will fit 4lug honda or nissan bolt patterns.

-Manta NZ0 staggered 17x8 and 17x9 4x114.3 wheels with tires (Federal 205/40 front/215/45 rear)- ($700)



-Dual 12" Maxima fans, perfect for any cooling application ($75)

If you have any questions, feel free to email me at isimon91@gmail.com or just send me a PM.. Prices are negotiable.

Pictures:



Solstice seat




vmount intercooler




piping, etc


SR shortblock. perfect compression. come see the internals for yourself. just needs a little degreasing.



greddy fmic piping



upper peakboost downpipe


PM me if u need a pic of a specific part

Bump, I am also willing to trade for the following parts:
-20mm bolt on spacers
-SR intake piping for a Z32 MAFS and T28 turbo
-SR test pipe
-195/50/17 sized tires

buuuump. shoot me offers..

buuump

is the short block a SR or just the KA?

Sr. And it's no longer for sale. Unless you need interals.

Na, gotta overhaul mine in the spring. Smokes bad under boost now. Would've been nice to have a built bottom end done and just swap the head over when I take it out. I was only looking for the block and crank. No biggie, just going to have deal with a little more downtime then.

bump

Hey Ian is the radiator a no-name brand??

yeah i think it is, its beefy it barely fits in the engine bay. youd have to make custom hoses for it.

prices adjusted and parts added..

Do you have any pics of the seats?

It's a good day to buy an SR harness.. or a perfect bottom end..

yeah

Hey any pics of the greddy front mount?

Send me a pic of the radiator dude.

buump. pm'd.

dave lies. SR bottom end still fo sale.

buump. pix and solstice seat added..

bump.

buump.

also have a set of federal 215/45/17 tires for sale now, 95% or more tread left.

BUMP.

sr injectors/ rail sold

How much for them tires? I got a pair of 38's.
That fucking turbo is calling my KA's name.

Im keepin the tires i took em down.

pm'd bout the turbo

I still have other shit to buy right now. And ill be broke after I finish up getting the car put together, no money for the rest of a t3/t4 kit.

Slow and steady, we dont want to over do it!!!

MUST.
DRIVE.
ALOT.
AGAIN.

MUST.
DRIVE.
ALOT.
AGAIN.

MUST.
DRIVE.
ALOT.
AGAIN.