Parting out entire 1990 SOHC AUTO COUPE - White and rusty

Name: Sebastian Sz.
Location: CHITOWN - northwest side near Ohare
Contact: sostech@gmail or 773-391-4313
Payment: Cash or Paypal
Shipping: Maybe

------------------------------------------------------------------

I am parting out an entire 1990 SOHC Auto Coupe. The car is WHITE and pretty RUSTY. The car no longer has a motor but I got an automatic trans and a rebuilt torque converter that was supposed to go into it. Everything is up for grabs so pretty much ask for what you need.

THINGS CURRENTLY NOT BEING SOLD:

Driver side door w/panel
Passenger side door w/panel
Cluster
Driver side Fender
Heater core
Climate control

Those are things ill need for my daily S13 coupe. Everything else is pretty much for sale. Ill have some pics up by tomorrow.

Passenger side fender condition.

i sent u a pm for the fuel injectors

shiftin_sideways wrote:

Passenger side fender condition.

Unfortunately that one is dented and has some rust bubbling. But if you need a fender just to put on you might be able to pop it out.

Ill have to run to the garage to take pics. Ill update this thread in a few minutes.

mrkan wrote:

i sent u a pm for the fuel injectors

Check inbox, I responded.

Some pics for y'all:

you have the power steering lines?

Yo dude how is the carpet condition? i need one...

Master Trucky wrote:

Yo dude how is the carpet condition? i need one...

I got a local that wants to pick it up.... once I take it out ill snap pics. Ill probably go to the garage in a couple minutes.

SIMON wrote:

you have the power steering lines?

Yeah, these are SOHC power steering lines.

Just an update of what is already sold:

- S14 driver side seat
- The gauge cluster trim
- floor mats
- Steering wheel column trim
- Gas door thingy

***** Rear window just crumbled when I tried yanking it **********

Everything else minus the trunk plastics and the doors with panels is up for grabs.

Yo. How much for the distributor and the maf?

Axles too maybe.
Are they in decent shape?

President D*star wrote:

Yo. How much for the distributor and the maf?

Axles too maybe.
Are they in decent shape?

Well The engine is in my daily driver. Only distributor I have is from the blown SOHC that came off the car. I dunno shoot me an offer?

Axles are well... stock... I never really looked closely at them. Ill try to rip them off tomorrow and take pics.

President D*star wrote:

Yo. How much for the distributor and the maf?

Axles too maybe.
Are they in decent shape?

The MAF has 150K on it. I dunno shoot a number.

That sohc that you say blew.
It wasnt misfiring or anything before it popped was it?

President D*star wrote:

That sohc that you say blew.
It wasnt misfiring or anything before it popped was it?

I never drove it, I bought it blown... guy said it was headgasket, I took the valve cover off and it was milky in there LOL.... but chassis/car had 78K on them.

I dunno I might keep it... why yours actin up?

Nah. I only asked to make sure the dizzy was straight.
Singles miss like faggots when the dizzy'z get old.

Had it happen a few times on my old motor. My current one misses when you hit a bump. The grounds are good thouh. Previous experience's with singles point to a bad dizzy and or maf.
Figure ill get them both.

got the headliner?

have all the trunk hardware? i currently have to prop mine open

rcl1221 wrote:

got the headliner?

have all the trunk hardware? i currently have to prop mine open

Yes

what's your asking price for those?

Everything is based on offers. Shoot an offer for it and if it sounds good you can have it. Otherwise ill hover around junkyard prices since this car isnt mint or anything. But actually interior is pretty clean.

You still got the trunk? Whats the condition, and how much

you still got the doors?? are they Manual windows?? and what is the codition? PM me

Doors I am keeping for my daily since they are manual and better then the ones on there.

I do have the trunk. Its good not perfect, has no spoiler holes, paint is okay, but one large rust spot on it.

oh ok....